I ran into a UE96 Error

Issue:

I ran into a UE96 error when running my block.

Applies to:

  • Meshing
  • Hardware and Systems

Cause:

The cause for this error is usually due to your machine running out of memory as it is running the block.

Solution:

There are a few fixes we can suggest when this occurs:

    • If it happened when you were using a meshing block, try increasing the tolerance of edge length sizes.
    • If you aren't able to do this, open Task Manager and watch your memory when you are running the process in nTopology. See if your memory hits its limit. 
      • If the memory is hitting its limit: Make sure your hardware matches the minimum system requirements: nTopology System and Licensing Requirements Guide. If it doesn't, it may need to be upgraded in order to optimally run nTopology.
      • If the memory isn't hitting its limit, contact Support.

If you still need assistance, reach out to Support and we will assist you.

More on this topic:

Keywords:

 error mesh meshing system memory ram manager issue hardware UE96 96 UE task 
Was this article helpful?

Comments

0 comments

Please sign in to leave a comment.